Zostavy

(653 products)

  • Came drive for single-leaf gate, set with photocells ATS-5-AGS-LEFT/RIGHT-ZKIT

    Mark
    Came
    Max. wing length
    5m
    Recommended weight of the wing
    200kg
    €359,38
    without VAT
    €442,04 with VAT
    Low stock (13 units)
    SET
    Part of set

    CAME drive for swing gate ATS-50-AGS

    1 pcs
    Mark
    Came
    Max. wing length
    5m
    Recommended weight of the wing
    200kg

    Electronics cabinet for double-leaf gate ZF-1N

    1 pcs
    Mark
    Came

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came

    Remote controller CAME TOP fix code, 2CH, CAME TOP-432-EE

    1 pcs
    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Fix

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
  • Automatic motor with electronics 1200kg BKS-1800

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 4
    €522,50
    without VAT
    €642,68 with VAT
    Low stock (20 units)
    PCS
    Part of set
    Sets

    CAME automation for sliding gates, set, max 1800kg BKS-1800-ZKIT

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 4
    €609,91
    without VAT
    €750,19 with VAT
    Low stock (20 units)
    SET
  • Railing JP, VR STAIRS AISI304, 40x40x2/4xd12/H900/ AJP/ZVS90-3000

    Material
    Stainless steel AISI 304
    Handrail
    D42,4x2
    Surface finish
    Satined
    €182,56
    without VAT
    €224,55 with VAT
    In stock (39 units)
    SET
    Part of set

    Stainless steel tube A/42,4x2-3000-EXCLUSIVE

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Post
    D42,4x2
    Required products

    Stainless steel brushed pipe A/12x1,5-3000

    4 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Filling
    d12
    Required products

    End cap A/0221-012

    8 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Filling
    d12
    Required products

    End cap A/5729-242

    2 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Effect
    Natural

    Stainless Baluster pole, VK-stairs AJP-VS90-4D12

    3 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Type/Height
    Stairs/900mm

    Hexagon socket button head screw, AISI304, M5x12 A-DIN 7380-A2 M5x12

    6 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    12
  • Decorative cast iron sink 450x795mm, cast iron, black L/01-L

    Material
    Cast Iron
    €111,56
    without VAT
    €137,22 with VAT
    In stock (242 units)
    PCS
    Part of set

    Decorative cast iron sink 405x535mm, cast iron L/01-L-štít

    1 pcs
    Material
    Cast Iron

    Decorative cast iron sink 450x250x175mm, cast iron L/01-L-vanička

    1 pcs
    Material
    Cast Iron

    Decorative cast iron sink 120x85x80mm, cast iron, L/01-L-kryt sifónu

    1 pcs
    Material
    Cast Iron

    Anchoring material for sink L/01-L-kotviací mat.

    2 pcs
    Material
    Cast Iron

    sink syphon L / 01-L-Zn D60 / 22mm, 130x150mm L/01-L-sifon

    1 pcs
    Material
    Cast Iron
  • Stainless steel pole - BK, straight A-BR100-4G

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Glass t
    8,76
    €50,93
    without VAT
    €62,64 with VAT
    In stock (24 units)
    PCS
    Alternatives
    Part of set

    Stainless steel pole - BK, straight A-BR100-4G-250P

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Glass t
    8,76
    €63,36
    without VAT
    €77,93 with VAT
    In stock (124 units)
    PCS

    Baluster post inox A-VR100-4G

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Glass t
    8,76
    €49,39
    without VAT
    €60,75 with VAT
    In stock (252 units)
    PCS

    Stainless steel Baluster post A-BR100-5D12

    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Type/Height
    Plane/1000mm
    €38,48
    without VAT
    €47,33 with VAT
    In stock (603 units)
    PCS

    Sutured brushed inox pipe A/42,4x2-1000

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Post
    D42,4x2

    Adjustable handrail bracket A/0718-242

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Effect
    Natural
    Required products

    Glass clamp A/2200-042

    4 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Glass t
    8/8,76/10/10,76/1,5/2/3
    Required products

    Rubber inlay for glass clamp A19/22-009

    8 pcs
    Material
    Rubber
    Surface finish
    Raw
    Glass t
    8,76

    Baluster bracket A6/021-6-A

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Post
    D42,4x2
    Required products

    End cap A/5729-242

    1 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Effect
    Natural

    Small head rivet nut, stainless steel, AISI304, M8mm A-FTT-M8

    4 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    16,5
  • ROLLKIT drive for double-leaf gate, set with photocells TURN2020-SMART-ZKIT

    Mark
    Rollkit
    Max. wing length
    2,5m
    Recommended weight of the wing
    100kg
    €296,30
    without VAT
    €364,45 with VAT
    In stock (230 units)
    SET
    Part of set

    ROLLKIT drive for swing gate, set TURN-2020-SMART

    1 pcs
    Mark
    Rollkit
    Max. wing length
    2,5m
    Recommended weight of the wing
    100kg
    Required products

    ROLLKIT photocell for plaster max 20m FT-20

    1 pcs
    Mark
    Rollkit
    Power supply
    12-24V AC/DC
    Protection level
    IP54
  • ROLLKIT automation for sliding gates up to 800kg DRIFT-80-SMART

    Mark
    Rollkit
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    400kg
    €247,50
    without VAT
    €304,43 with VAT
    In stock (214 units)
    PCS
    Alternatives
    Part of set
    Sets

    CAME automation for sliding gates, set, max 800kg BXV-8-ZKIT

    Mark
    Came
    Max. wing length
    20m
    Module of the gear comb
    mod 4
    Required products
    €362,87
    without VAT
    €446,33 with VAT
    In stock (156 units)
    PCS

    CAME actuator for leaf gates set, max 800kg, BX-STRONG-AGS-ZKIT

    Mark
    Came
    Max. wing length
    4m
    Module of the gear comb
    mod 4
    Required products
    €313,50
    without VAT
    €385,61 with VAT
    In stock (347 units)
    PCS

    ROLLKIT automation for sliding gates, kit, max 800 DRIFT80-SMART-ZKIT

    Mark
    Rollkit
    Recommended weight of the wing
    400kg
    Drive slowdown
    Drive decelerate before endpoint
    €269,92
    without VAT
    €332,00 with VAT
    In stock (214 units)
    SET

    ROLLKIT automation for sliding gates, kit, max 800 DRIFT80-SECURITY-ZKIT

    Mark
    Rollkit
    Recommended weight of the wing
    400kg
    Drive slowdown
    Drive decelerate before endpoint
    €313,92
    without VAT
    €386,12 with VAT
    In stock (27 units)
    SET

    ROLLKIT electronics with receiver for DRIFT 80 CUD-3S/80

    1 pcs
    Mark
    Rollkit
    Frequency (MHz)
    433
    Wifi connection
    Yes

    Remote controller for TURN, DRIFT rolling code, 4C TR2-434

    2 pcs
    Mark
    Rollkit
    Frequency (MHz)
    433
    Code type
    Rolling
  • NICE automation for sliding gates, set, max 1500kg THOR1500-ZKIT

    Mark
    Nice
    Max. wing length
    14m
    Module of the gear comb
    mod 4
    €374,79
    without VAT
    €460,99 with VAT
    In stock (89 units)
    SET
    Part of set

    NICE automation max 1500kg THOR-1500

    1 pcs
    Mark
    Nice
    Max. wing length
    14m
    Module of the gear comb
    mod 4

    Photocell for plaster montage - do 30m EPM

    1 pcs
    Mark
    Nice
    Power supply
    12-24V AC/DC
    Protection level
    IP44
  • Nice drive for a double-leaf gate, set with photocells WINGO3524HS-KIT

    Mark
    Nice
    Max. wing length
    3m
    Recommended weight of the wing
    100kg
    €796,42
    without VAT
    €979,60 with VAT
    Very low stock (3 units)
    SET
    Part of set

    Automation for leaf up to 3m, HI-SPEED WG3524HS

    2 pcs
    Mark
    Nice
    Max. wing length
    3m
    Recommended weight of the wing
    100kg

    Photocell for plaster montage - BLUEBUS do 30m EPMB

    1 pcs
    Mark
    Nice
    Power supply
    BlueBus
    Protection level
    IP44

    Receiver 4- canals NICE ONE OXIBD

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Remote control NICE ONE ERA 2 channels rolling cod ON-2E

    1 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    NICE electronics box MC824H 24V MC824H

    1 pcs
    Mark
    Nice
  • KEY - automatic gate opener kit, max 800kg, KEY - automatic gate opener kit, max 800kg,
    Sale

    KEY - automatic gate opener kit, max 800kg, TURBO80-ZKIT-R

    Mark
    Key
    Module of the gear comb
    mod 4
    Recommended weight of the wing
    400kg
    Out of stock
    €308,33
    without VAT
    €379,25 with VAT
    Backordered
    PCS
    Alternatives
    Part of set

    Automatic motor with BLUEBUS electronics do 1000kg ROBUS-1000

    Mark
    Nice
    Max. wing length
    12m
    Module of the gear comb
    mod 4
    Required products
    €396,00
    without VAT
    €487,08 with VAT
    In stock (257 units)
    PCS

    CAME automation for sliding gates, set, max 800kg BXV-8-ZKIT

    Mark
    Came
    Max. wing length
    20m
    Module of the gear comb
    mod 4
    Required products
    €362,87
    without VAT
    €446,33 with VAT
    In stock (156 units)
    PCS

    Control unit for sliding gate 230V CT-102

    1 pcs
    Mark
    Key

    Receiver 4-channels - universal 433,9Mhz RX4

    1 pcs
    Mark
    Key
    Frequency (MHz)
    433
    Code type
    Multi (fix/rolling)
    Transmitter rolling code, 4CH, 433,92MHz
    Sold out

    Transmitter rolling code, 4CH, 433,92MHz SUB-44R

    2 pcs
    Mark
    Key
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage do 30m FT-23

    1 pcs
    Mark
    Key
    Power supply
    12-24V AC/DC
    Protection level
    IP54
  • Wooden handrail OAK and stainless steel holders, L3000mm WD/M-3000

    Material
    Wood Oak
    Surface finish
    Raw
    L
    3000
    Required products
    €84,22
    without VAT
    €103,59 with VAT
    In stock (57 units)
    SET
    Alternatives
    Required products
    Part of set
    Wooden handrail OAK - FINGER-JOINTED and stainless steel brackets, L3000mm Wooden handrail OAK - FINGER-JOINTED and stainless steel brackets, L3000mm
    Sale

    Wooden handrail OAK - FINGER-JOINTED and stainless steel brackets, L3000mm WD/M-3000-CINK

    Material
    Wood Oak - CINK
    Surface finish
    Raw
    L
    3000
    Required products
    €66,82
    without VAT
    €82,19 with VAT
    In stock (342 units)
    SET

    Wooden handrail OAK - lacquered and stainless steel brackets, L3000mm WD/M-3000-LACQ

    Material
    Wood Oak
    Surface finish
    Lacquered
    Effect
    Transparent
    Required products
    Out of stock
    €110,73
    without VAT
    €136,20 with VAT
    Backordered
    SET

    Wooden handrail OAK and stainless steel brackets, JP40x40mm/L3000mm WDJP/M-3000

    Material
    Wood Oak
    Surface finish
    Raw
    Shape
    JPL profile
    Required products
    €98,43
    without VAT
    €121,07 with VAT
    In stock (93 units)
    SET
    Wooden handrail OAK - FINGER JOINT and stainless steel holders, JP40x40mm/L3000mm Wooden handrail OAK - FINGER JOINT and stainless steel holders, JP40x40mm/L3000mm
    Sale

    Wooden handrail OAK - FINGER JOINT and stainless steel holders, JP40x40mm/L3000mm WDJP/M-3000-CINK

    Material
    Wood Oak - CINK
    Surface finish
    Raw
    Shape
    JPL profile
    Required products
    €81,36
    without VAT
    €100,07 with VAT
    In stock (143 units)
    SET

    Nylon anchor GL PVC, d12, h60mm Q5/07-12 NYLON

    Material
    Plastic/Nylon
    Use
    Anchoring
    €0,10
    without VAT
    €0,12 with VAT
    In stock (11965 units)
    PCS

    Dowel screw with metric-and wood thread, stainless steel, AISI304, M8x60 A-DIN 9210 M8x60-A2

    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    60
    €0,48
    without VAT
    €0,59 with VAT
    In stock (12657 units)
    PCS

    Aircrete anchor - zinc plated, M8mm Q11/FPX-M8

    Material
    Steel
    Surface finish
    Galvanized
    L
    75
    €3,25
    without VAT
    €4,00 with VAT
    In stock (1034 units)
    PCS

    Wall handrail bracket A/0111-042

    3 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Effect
    Natural
    Required products

    Wooden handle - OAK WD/D42-L3000

    1 pcs
    Material
    Wood Oak
    Surface finish
    Raw
    Post
    D42,4x2

    Pan head chipboard screw, full thread, stainless steel A-PH 5x20

    6 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    20
  • Wooden handle BEECH and stainless steel holders, L1600mm WB/M-1600

    Material
    Wood Beech
    Surface finish
    Raw
    L
    1600
    Required products
    €28,27
    without VAT
    €34,77 with VAT
    In stock (61 units)
    SET
    Alternatives
    Required products
    Part of set

    Wooden handrail BEECH and stainless steel brackets, L2000mm WB/M-2000

    Material
    Wood Beech
    Surface finish
    Raw
    L
    2000
    Required products
    €37,78
    without VAT
    €46,47 with VAT
    In stock (340 units)
    SET

    Nylon anchor GL PVC, d12, h60mm Q5/07-12 NYLON

    Material
    Plastic/Nylon
    Use
    Anchoring
    €0,10
    without VAT
    €0,12 with VAT
    In stock (11965 units)
    PCS

    Dowel screw with metric-and wood thread, stainless steel, AISI304, M8x60 A-DIN 9210 M8x60-A2

    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    60
    €0,48
    without VAT
    €0,59 with VAT
    In stock (12657 units)
    PCS

    Aircrete anchor - zinc plated, M8mm Q11/FPX-M8

    Material
    Steel
    Surface finish
    Galvanized
    L
    75
    €3,25
    without VAT
    €4,00 with VAT
    In stock (1034 units)
    PCS

    Wall handrail bracket A/0111-042

    2 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Satined
    Effect
    Natural
    Required products

    Wooden handle - BEECH WB/D42-L1600

    1 pcs
    Material
    Wood Beech
    Surface finish
    Raw
    Post
    D42,4x2

    Pan head chipboard screw, full thread, stainless steel A-PH 5x20

    4 pcs
    Material
    Stainless steel AISI 304
    Surface finish
    Raw
    L
    20